- Signgeer I.P.A. (Isopropyl Alcohol) - 1L, 5L or WipesFrom £8.00In stock
Grey Acrylic Foam tape perfect for fixing sign channel.
Perfect for powder coated metals and composite boards such as Di-Bond.
1.1mm thick. Available in three widths. 33m roll.
The general guidance temperature for applying tape is approx. +15⁰C - +30⁰C
Clean and degrease the surfaces with 100% isopropyl alcohol. The surfaces must be clean, dry and free of moisture, condensation, grease, dust and any other contaminants.
Prime the surface using a suitable primer, following the manufactures instructions.
Whilst handling the tape, ensure that the adhesive surface of the tape is not touched as this could cause cross-contamination and transfer of oils from the skin to the adhesive.
Apply the tape to the surface using a squeegee or preferably a roller to ensure a good, even pressure. This is key to ensure full adhesion of the tape to the surface.
We recommend leaving the finished product at least 24 hours prior to fitting to ensure the best adhesion of the tape to the product surface.
|CTAPE||Sign Channel Foam Tape - 24mm||1+||£26.80|
|CTAPE12||Sign Channel Foam Tape - 12mm||1+||£13.50|
|CTAPE19||Sign Channel Foam Tape - 19mm||1+||£21.25|