Sign Channel Fixing Rail with Grey Bonding Tape Applied
Small or Medium Grey Sign Channel with EPIC TRACK Grey Sign Channel Foam Tape pre-applied to the rear to save you time during production. Great for bonding channel to powder coated metals, aluminium composite, foamex and a range of other... Read more
APPLYING SIGN CHANNEL FOAM TAPE
The general guidance temperature for applying tape is approx. +15⁰C - +30⁰C
1. Clean
Clean and degrease the surfaces with 100% isopropyl alcohol. The surfaces must be clean, dry and free of moisture, condensation, grease, dust and any other contaminants.
2. Prime
Prime the surface using a suitable primer, following the manufacturer's instructions.
3. Apply
Whilst handling the tape, ensure that the adhesive surface of the tape is not touched as this could cause cross-contamination and transfer of oils from the skin to the adhesive.
Apply the tape to the surface using a squeegee or preferably a roller to ensure a good, even pressure. This is key to ensure full adhesion of the tape to the surface.
We recommend leaving the finished product at least 24 hours prior to fitting to ensure the best adhesion of the tape to the product surface.
