New In

SensorCut Pro - Cutting Aid for Parking Sensors

Product code: SENSORCUTPRO

Cut out parking sensors without damaging your material, vehicle rubbers and paintwork. The SensorCut Pro allows installers to wrap and cut out parking sensors on vehicles without having to use a knife on the body of the vehicle.... Read more

Cut out parking sensors without damaging your material, vehicle rubbers and paintwork.

The SensorCut Pro allows installers to wrap and cut out parking sensors on vehicles without having to use a knife on the body of the vehicle. This two piece set can help lower install times on sensors by up to 90% and reduce the risk of damage to zero.

This tool is for cutting the outer diameter of the gasket surrounding the sensor.

Made with special plastic that makes it sharp and durable. The shape, inspired by Japanese kitchen knives, cuts evenly and smoothly.

4 sizes included (each comes as a pair to ensure you always have a sharp one to use):

16mm
17mm
18mm
19mm

SensorCut Stencil

For templating infills for the inner section of the sensor. The durable stainless steel material allows the installer to cut safely along the shape with a blade. This is made even easier with a Swivel Knife. With a wide variety of sizes to choose from, installers can find the perfect fit to get full coverage every time.

Includes 10 sizes in 0.5mm increments from 14mm up to 18.5mm.

See more details below on how to use, or check out the video in the image gallery.

Read less

Notify me when this product is in stock

Description

Outside Gasket Protocol:

Before wrapping, find the right size needed for the outer diameter cut
Wrap the bumper and form the film around the outside part of each sensor with the corner of a squeegee
Take the SensorCut and place it uniformly around the sensor
Press gently towards the sensor and turn it left and right one or two times
Use tweezers to grab an edge of the cutout piece and lift it safely away from the bumper
Use a squeegee or tucking tool to seal the film to the base or behind the gasket

Inside Gasket Protocol:

Place the SensorCut Stencil on the sensor to find the right size needed
Then, plate the Stencil flat on a cutting mat, take a scrap piece of the wrapping film and bridge over the cutout
Use a sharp knife and make a 360-degree cut along the edge of the stencil
Place the cutout on a tucking tool or hold with tweezers to avoid contamination of the adhesive
Place uniformly on the inner section of the sensor
Add heat to relax the film first then seal to the edge or behind the gasket

Quantity Pricing

Product Code	Description	Qty	Price ex. VAT
SENSORCUTPRO	SensorCut Pro - Cutting Aid for Parking Sensors	1+	£43.00

Ask a question

Product Reviews