Hero SuperGlue & Activator Starter Kit
A high viscosity modified Cyanoacrylate adhesive specially formulated for the bonding a very wide range of materials including plastics, rubbers, wood, paper, cardboard, leather, metals and other common substrates inlcuding porous... Read more
HERO GLUE
Hero Glue is a high viscosity modified Cyanoacrylate adhesive specially formulated for the bonding of plastics, rubbers, wood, paper, cardboard, leather, metals and other common substrates inlcuding porous ones. It relies less on surface moisture for cure speed than other standard adhesives. A good all rounder where a fast cure speed is required.
- Clear
- Great for gap filling
|
Chemical type |
Ethyl |
|
Appearance |
Clear |
|
Specific Gravity |
1.08 |
|
Viscosity (cPs¹) - Range - Typical Value |
1275 – 1650 1500 |
|
Tensile Strength² |
21 N/mm² |
|
Fixture Time |
5-60 secs |
|
Full Cure |
24 hours |
|
Flash Point |
> 85 °C |
|
Shelf Life @ 5°C |
12 months |
|
Max Gap Fill |
0.20mm |
|
Operating Temperature Range |
-50 to +80°C |
¹Brookfield LVF, spindle 3, 30rpm, ²ISO 6922
MEGA ACTIVATOR
Mega Activator (designed for use with Hero Glue or other Cyanoacrylate adhesives) is a solvent-based "On-demand" activator formulated to increase the cure speed. Especially suitable on slower high viscosity grades.
Especially good for the bonding of UPVc plastics where ‘yellowing’ can be a consideration.
- Can be used to fillet cure and cure adhesive outside the joint
- Low risk of staining on UPVc plastic
- Cures Hero Glue (and other Cyanoacrylate adhesives) in adverse conditions
- Sets cure off in seconds
|
Chemical type |
Organic Solvent Base |
|
Appearance |
Clear |
|
Specific Gravity |
0.7 (@25c) |
|
Flash Point |
<15 °C (highly flammable) |
| Stockcode | Description | Qty | Cost |
|---|---|---|---|
| HEROGLKIT | Hero SuperGlue & Activator Starter Kit | 1+ | £6.95 |
| Height (mm) | 55 |
| Length (mm) | 240 |
| Width (mm) | 150 |
| Weight (kgs) | 0.32 |