Signgeer

Euro Chieftain Lamppost Banner Bracket System (EN40 Compliant)

Product code: PROD-ECBRACKET

Premium quality lamp post bracket for mounting banners to lamp posts. Self tensioning system complaint with EN40 regulations as required by councils to mount banners to lighting columns. Wind tested up to 90mph. Please be aware of copy products on the market at lower prices claiming to be EN40 compliant without the relevant wind tunnel tests proving their compliance.

Helps to deal with expansion of PVC due to wind and heat and will keep your banner taut.

The Euro Chieftain system complies fully with the all-important Government Regulation EN40 which dictates the maximum wind load that any type of signage is allowed to exert onto a standard street lighting column which is often a general requirement for local authority and county council tenders.

Wind tunnel test results on technical data sheet in the downloads section.

Suitable for lamp post columns and poles from 76mm diameter upwards, whether straight, fluted or tapered (simply select the correct Tamtorque clips to correspond).

Brackets must be installed using 3 Tamtorque Stainless Steel bands per bracket (6 per set) which provide a tamper resistant fix.

Estimated installation time approx. 20 minutes per banner.

Maximum recommended banner sizes listed below.

Pole diameter 18mm. Poles can be cut to size to suit your banner. Replacement poles available.

915mm total length. 850mm black part only.

Full 5 year product warranty (more details in warranty statement available in the downloads section).

What do I need for a complete system?

The system alone comprises of two black fibreglass arms, two black powder-coated aluminium brackets with integrated spring-loaded tensioning and banner arm flexing mechanisms, two metal clips to secure the poles to the brackets as shown in the image and two pieces of neoprene sheet which sit between the bracket housing and pole.

To complete the system, tamtorque clips need to be added in addition to suit the size post required (3 Tamtorque Stainless Steel bands per bracket, 6 per set), Tamtorque fixing tools if you do not have these already and 1 cable tie per bracket, 2 per set.

Read less

Notify me when this product is in stock

Select Products

Euro Chieftain Banner Bracket System - 2 Spring Brackets, 2 Poles & 2 Pins Product Code: ECBRACKET

£152.40 £127.00

Tamtorque Clips - 55mm - 70mm Product Code: TT70

£4.54 £3.78

50 for £4.08 £3.40 each

Tamtorque Clips - 70mm - 100mm Product Code: TT100

£4.96 £4.13

50 for £4.46 £3.72 each

Tamtorque Clips - 100mm - 130mm Product Code: TT130

£5.28 £4.40

50 for £4.75 £3.96 each

Tamtorque Clips - 130mm - 160mm Product Code: TT160

£5.40 £4.50

50 for £4.86 £4.05 each

Tamtorque Clips - 130mm - 190mm Product Code: TT190

£6.10 £5.08

25 for £5.48 £4.57 each

Tamtorque Clips - 190mm - 250mm Product Code: TT250

£6.73 £5.61

25 for £6.06 £5.05 each

Tamtorque Clips - 250mm - 340mm Product Code: TT340

£7.86 £6.55

25 for £7.08 £5.90 each

Tamtorque Power Tool Bit (Pack of 2) Product Code: TPT

£10.20 £8.50

Tamtorque Manual Combi Driver Product Code: TMD

£21.60 £18.00

Nylon Cable Ties - 200x4.8mm (55mm Diameter) Natural - Pack of 100 Product Code: CT203

£2.46 £2.05

Subtotal (0)

£0.00 ex. VAT

£0.00 inc. VAT

Description

Most common banner sizes recommended are:

2000mm (L) x 600/750/800mm (W) and 2200mm (L) x 600/750/800mm (W).
Maximum banner size accommodated: 3000mm x 800mm (only for short term or a very low-wind area)

Features

Proven design with market-leading wind-spill factor
Full compliance with the EN40 Government Regulation that dictates all lighting columns must be capable of facilitating the wind loading that a single 0.3 square meter rigid road sign would exert
Wind tunnel tested up to 90mph; Results available in PDF format in the downloads section illustrating compliance with EN40
Suitable for installing onto lamp columns and flag poles from 76mm diameter and above using the correct corresponding clips
Compatible with straight, fluted or tapered columns
Arms can be cut down to match any banner width required up to 800mm wide
Can be used for one or two banners per column
Arms easily removed in between banner campaigns leaving brackets and banding in place on the column
Brackets installed onto columns using 3 Tamtorque stainless steel bands per bracket, estimated installation time to install one complete system and banner: 20 minutes
Can be wall mounted using pre-drilled holes within bracket
Full 5 Year product warranty (warranty statement available in the downloads section)

Attachments

Euro Chieftain System Technical Data & Warranty Statement PDF 3.8 MB

DOWNLOAD

Euro Chieftain Installation Instructions PDF 4.9 MB

DOWNLOAD

Product Reviews