Great for bonding clear acrylic to clear acrylic.
A versatile, single component solvent weld cement suitable for general fabrication work which does not need high bond strength.
Especially suitable for bonding extruded acrylic, polycarbonate, high impact polystyrene and PETG without stress crazing.
Also suitable for joining items made from acrylic polymers as well as cast acrylic (Perspex) although eventually crazing may appear.
Particularly good for butt and small lap joints.
Applies best using a needle and syringe, especially where precision is critical.
For internal use only.
- Cure time: Initial cure 1-2 minutes, Full cure 24-48 hours
- Coverage: >10m² per litre
- Specific gravity: 1.1kg per litre
- Shelf life: 9 months
- Storage: 5 - 30°C
Should not be used for outdoor applications and cannot be used with Perspex ME, Perspex SW or Perspex AG grades. It is also not recommended for laminating cast acrylic (Perspex) sheets as crazing will eventually appear.
Part of the Hypersol Range.