Cyclops 360 Auto Self Levelling Red Laser - Laser Only

The ideal tool during any type of sign installation eg: fitting signboards, wallpapering and especially when applying vehicle graphics.

Manual tilt operation

It is possible to incline the laser at any angle in this mode. Just lock the pendulum setting and the laser beams will be projected at any required inclination. This function is useful when setting levels for vehicle signwriting when you need to match the angle of the panels/sills rather than the auto level to ensure the graphics look straight

Accurate levelling

Auto self-levelling (recommended for vehicle signwriting) when engaged, the accuracy is +/- 0.3 mm/m.

 

There is no need to rotate the instrument when making horizontal markings. Just place the box on the selected height. The horizontal beam will be along the perimeter. There is a 90° projection (laser cross) when switching on the vertical line. (this can be turned off to conserve battery power if required)

Two places of attachment

Place on the tripod or attach to the wall mount using the ¼” thread. One thread is located on the back part of the instrument, another is on the bottom.

Protected housing

The whole housing of the laser is protected from all sides. The rubber housing protects the instrument against damages during falls and knocks.

Wall mounting

The metal angle bracket with magnets and 5/8″ thread allows the fixing of the line laser on any surface. The magnets allow the laser to be fitted on the side of a vehicle if required with the beam projecting from the side.